Residential Pool and Spa Services
- Standard Engineering showing generic compliance with the FBC for submittal with your permit package
- Site or project specific information to demonstrate compliance with ANSI 7 (suction entrapment) and ANSI 15 (energy) requirements contained in the FBC
- Supplemental specifications when projects need retaining walls, negative edge details, or other special pool or spa structural situations not covered in the standard engineering
- $375 per year for unlimited use in a single building department jurisdiction -or-
- $150 for 12 original signed and sealed sets, for use in any jurisdiction -or-
- $50 for two sealed sets, for one specific project ($25 if we do the site specific ANSI 7 and ANSI 15 work)
When needed, we are glad to modify our engineering, at no added cost
Leave a Reply
You must be logged in to post a comment.
$100, which includes an ANSI 15 sheet and an ANSI 7 sheet with detailed TDH calculations
Leave a Reply
You must be logged in to post a comment.
We can certainly take care of that, but give us a call for a quote
Simply call or email the information. Tell us who you are, what building departments you work and if you need unlimited/mastered digital use, multiple ink signed originals or digital/ink signed for individual jobs. Send us your pool plan/site plan for the individual jobs, as a code related plan review is always included. We can mail or email those on the next business day.
Leave a Reply
You must be logged in to post a comment.
- Simply fax or email your dimensioned plan (and site plan, if the equipment location isn’t shown on the plan)
- Make sure the following information is on the plan or in the fax/email:
- Project address and owner information
- Specific brand and model of the recirculation pump
- Specific brand and model of other pumps
- Specific brand and size of filter
- Specific brand and model of heater
- Number of suction outlets and specific outlet covers you use
- Any specific pipe sizes you prefer.
Leave a Reply
You must be logged in to post a comment.
We are glad to specify equipment within your guidelines and offer draft information for approval
Leave a Reply
You must be logged in to post a comment.
When we have all the needed specific information, we will get original ink signed or digital signed sets out within two days to five days
Leave a Reply
You must be logged in to post a comment.
Commercial Pool and Spa Services
- Standard Engineering showing generic compliance with the FBC for submittal with your permit package
- Site or project specific information to demonstrate compliance with ANSI 7 (suction entrapment) and ANSI 15 (energy) requirements contained in the FBC
- Supplemental specifications when projects need retaining walls, negative edge details, or other special pool or spa structural situations not covered in the standard engineering
- $375 per year for unlimited use in a single building department jurisdiction -or-
- $150 for 12 original signed and sealed sets, for use in any jurisdiction -or-
- $50 for two sealed sets, for one specific project ($25 if we do the site specific ANSI 7 and ANSI 15 work)
Leave a Reply
You must be logged in to post a comment.
When needed, we are glad to modify our engineering, at no added cost
Leave a Reply
You must be logged in to post a comment.
$100, which includes an ANSI 15 sheet and an ANSI 7 sheet with detailed TDH calculations
Leave a Reply
You must be logged in to post a comment.
We can certainly take care of that, but give us a call for a quote
Simply call or email the information. Tell us who you are, what building departments you work and if you need unlimited/mastered digital use, multiple ink signed originals or digital/ink signed for individual jobs. Send us your pool plan/site plan for the individual jobs, as a code related plan review is always included. We can mail or email those on the next business day.
Leave a Reply
You must be logged in to post a comment.
- Simply fax or email your dimensioned plan (and site plan, if the equipment location isn’t shown on the plan)
- Make sure the following information is on the plan or in the fax/email:
- Project address and owner information
- Specific brand and model of the recirculation pump
- Specific brand and model of other pumps
- Specific brand and size of filter
- Specific brand and model of heater
- Number of suction outlets and specific outlet covers you use
- Any specific pipe sizes you prefer.
Leave a Reply
You must be logged in to post a comment.
We are glad to specify equipment within your guidelines and offer draft information for approval
Leave a Reply
You must be logged in to post a comment.
When we have all the needed specific information, we will get original ink signed or digital signed sets out within two days to five days
Leave a Reply
You must be logged in to post a comment.
Leave a Reply
You must be logged in to post a comment.